DP Epoxy Grout PG

Epoxy Grout PG is the only pumpable, expansive, non-shrink, low exothermic epoxy grout for machinery grouting.  This versatile dual-purpose product is formulated for single, large volume placements and may be used as thin as 1/2" (13 mm) and up to 6" in depth.  Epoxy Grout PG is a three component, 100% solids, solvent-free system formulated to provide high strength and superior creep resistance combined with the highest effective bearing area.  Epoxy Grout PG exhibits positive expansion when tested in accordance with ASTM C 827.


  • Pumpable
  • Expansive, non-shrink per ASTM C 827
  • Permanent support for machinery requiring precision alignment
  • Superior creep resistance
  • Low exothermic properties with early strength development
  • Chemically resistant
  • Solvent-free clean up
  • Long working time
  • 95% Effective Bearing Area (EBA) is typically achieved following proper grouting procedures
  • Large volume pours up to 50ft2
  • Five Star DP Epoxy Grout PG meets the requirements of the American Petroleum Institute Standard 610, Appendix L for Baseplate and Soleplate Grouting at full aggregate loading


  • Large volume applications
  • Aggressive chemical environments
  • Foundation rebuilds and skid mounted equipment
  • Support of chemical tanks, vessels and rotating equipment
  • Precision alignment under dynamic load conditions
  • Installation of anchors and dowels
  • Vibration dampening for rotating equipment
  • Operating temperatures up to 180ºF (82ºC)